You are here:
Norwegian accreditation

Accreditation scope for

TEST 260

Driftsassistansen for vann og avløp i Oppland (DiO)

Bryggerigata 1
2609 Lillehammer

Telephone: 61227900/61227901
E-mail: eldri.bjornstad.kolden@norconsult.com
Internet: http://www.dio.as
The laboratory meets the requirements in

NS-EN ISO/IEC 17025:2017




Accreditation includes:
Hide all Show all
The administrative / geographical unit:
Aurdal, Nord Aurdal kommune
Jernbanevegen 22, 2900 Fagernes


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Beito, Østre Slidre kommune
Tingvang, Bygdinvegen 1989
2940 Heggenes


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Brandbu, Gran kommune
Rådhusvegen 39
2770 Jaren


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Intern metode
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet of pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Dokka, Nordre Land kommune
Storgata 28, 2870 Dokka


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Dombås, Dovre kommune
Kongsvegen 4, 2662 Dovre


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Dovre, Dovre kommune
Kongsvegen 4, 2662 Dovre


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Fagernes/Leira, Nord Aurdal kommune
Jernbanevegen 22, 2900 Fagernes


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Fossbergom, Lom kommune
2686 Lom


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Frya, Sør Fron kommune
Kommunevegen 1, 2647 Sør-Fron


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Fåvang, Ringebu kommune
Hanstadgt 4,
2630 Ringebu


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Harestua, Lunner kommune
Hadelandsvegen 853, 2743 Harestua


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Jevnaker, Jevnaker kommune
Kirkegata 6, 3520 Jevnaker


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Kapp, Østre-Toten kommune
Rådhusgata 20
2850 Lena


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Lena, Østre Toten kommune
Rådhusgata 20
2850 Lena


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Lillehammer, Lillehammer kommune
Dampsagvegen 120
2609 Lillehammer


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Otta, Sel kommune
Botten Hansens gate 9 2670 OTTA


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Ringebu, Ringebu kommune
Hanstadgt 4,
2630 Ringebu


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Røn, Vestre Slidre kommune
Slidrevegen 16, 2966 Slidre


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Tine Meierier, Lom og Skjåk kommune
Skjåkvegen 8, 2690 Skjåk


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Tretten, Øyer kommune
2636 ØYER


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from open systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Vaset, Vestre Slidre kommune
Slidretun, 2966 Slidre


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Volla, Lunner kommune
Sandsvegen 1, 2740 Roa


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control
The administrative / geographical unit:
Vågåmo, Vågå kommune
Industrivegen 48, 2680 Vågå


Permanent facility
P3001 Sampling waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Samples for chemical analysis
Reference standard
Internal method
Internal method identity
Comment
Method based on automatic sampling volume proportional samples from the inlet and outlet from open water systems. This is in accordance with the requirements of the Regulations relating to pollution control
P3099 Flow measurement of waste water
Object
Parameter
Reference standard
Internal method identity
Comment
Object
Waste water from sewage treatment plants
Parameter
Flow measurement
Reference standard
Internal method
Internal method identity
Comment
Method based on the measurement of water from pressurized systems. This is in accordance with the requirements of the Regulations relating to pollution control